• Made from top quality hardened steel. • Polished finish to resist rust and prolong blade life. • Ground with a fine 600 grit diamond wheel to achieve maximum sharpness. • Tipped with superior quality C2 and C3 tungsten carbide. • Plates on all our Professional Quality Blades are over HRC 40. • Most blades 10” and smaller have a 5/8” diameter arbor hole. • Blades larger than 10” have tension rings for improved flatness and have a 1" diameter arbor hole.

• Industrial quality at Professional prices.
• Laser cut body
• German C4 micrograin carbide tips.
• Anti vibration, noise reducing vents

•All purpose carbide blade used for crosscutting and ripping both softwoods and hardwoods.
•Provides a fast smooth cut in almost all types of wood.
•This special configuration uses four alternate top bevel cutting teeth and one raker tooth plus a special gullet for extra chip removal.

•Designed to provide splinter-free cutting.
•Excellent for use on hard and soft woods, particle board, plywood, veneers and expensive hardwoods.
•Alternating Top Bevel.

High quality, value-priced blades. Specifically designed for cutting fiber cement cladding products such as HardiPlank, Cemplank, etc. with minimal dust. Our 7 1/4 x 6 blade performed over 900 cuts on HardiPlank in our quality control lab.

•These premium blades are designed for cutting heavy duty work.
•Excellent for use in house framing.
•Ideal for worm drive and heavy duty machines.
•Alternating Top Bevel.

•Extra fine finishing blade.
•Extremely smooth cutting for melamine, laminates and plastics.
•Triple chip grind design results in chip-free cutting and long life of cutting edges.
•Ideal for use in both portable and stationary equipment.

•A hard bodied, thin kerf blade designed to cut steel roofing, metal siding and steel studs up to .062 gauge while providing superior performance and durability under high heat.
•Strong chip limiting shoulder design and 0º hook angle reduce overfeeding and jamming. This additional safety feature reduces tooth breakage and kickback.

• One of the safest blades available, provides long lasting, accurate performance under heavy duty, high heat conditions. • The super fine cutting edge offers fast, smooth cutting without waste or wear and tear on equipment. • The anti-kickback chip limiter safety feature eliminates grabbing and jamming. • C3 micrograin Tungsten carbide stays sharp longer. • A very aggresive hook angle for faster cutting.

• A specialized blade for cutting grooves (Dados), in all types of wood products. The carbide tipped blade is precision ground and balanced. Is fully adjustable to cut grooves from 1/8” to 13/16”. • Anti kickback design and 5º negative hook angle ensure smooth, precise dados. • Includes: 8" x 1/8" x 2 FTG inside chippers; 8" x 1/16" x 2FTG inside chippers; 8" x 1/32" x 2 FTG inside chippers; 8" x 24 teeth ATB blades; 15 spacers of various sizes

•The thin kerf provides a faster, smoother cut and will substantially reduce the workload of your saw. • C3 micrograin Tungsten carbide. • The plate hardness is C-45 to resist warpage. • It is sand blasted, then polished to help eliminate drag and friction.

• Ultra Thin carbide tipped blades are designed for finishing work on expensive woods, plywood and composition materials where waste must be kept to a minimum. The thin kerf provides a faster, smoother cut and will substantially reduce the workload of your saw. • The plate hardness is C-45. It is sandblasted, then polished to help eliminate drag and friction. • C3 micrograin Tungsten carbide.