Industrial Quality

Industrial Quality

  • Made from top quality hardened SK steel
  • Polished finish to resist rust and prolong blade life.
  • Ground with a fine 800 grit diamond wheel to achieve maximum sharpness.
  • Tipped with superior quality C2-C4 Tungsten carbide tips.
  • HRC 40-45 plates.
All Purpose

All Purpose

  • For crosscutting and ripping both softwoods and hardwoods.
  • Provides a fast smooth cut in almost all types of wood.
  • This special configuration uses 4 alternate top bevel cutting teeth and 1 raker tooth plus a special gullet for extra chip removal.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1015822 059511 015829 059511 900651 5/8" 10" 50
1015872 059511 015836 059511 900668 1" 12" 60
1015922 059511 015843 059511 900675 1" 14" 70
1015942 059511 015850 059511 900682 1" 15" 70
1015972 059511 015867 059511 900699 1" 16" 80
Cabinetry

Cabinetry

  • Designed to provide splinter-free cutting.
  • Excellent for use on hard and soft woods, partilcle board, plywood and plastic laminates.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1013972 059511 013979 059511 900538 1" 14" 80
1013922 59511 013894 059511 901078 1" 12" 100
Ferrous Metal

Ferrous Metal

  • For all kinds of mild steel, steel studs, sheet metal, pipe, channel, threaded rod, etc...
  • Specially formulated C6 carbide tips resist breakage on impact and last much longer than the standard carbide blades or abrasives.
  • These blades reduce sparks and eliminate wheel dust.
  • Provide clean cuts, eliminating the need to clean burrs.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth Description
1017352 059511 016192 059511 901115 5/8" 10" 42
1017372 059511 016208 059511 901139 5/8" DKO 7 1/4" 48
1017382 059511 016338 059511 901467 1" 12" 80 low rpm
1017392 059511 016345 059511 901474 1" 14" 80 low rpm
Fiber Cement

Fiber Cement

  • Specially designed to cut fiber cement cladding products such as Hardie-Plank and Cemplank with minimal dust.
  • Polycrystaline diamond layer (PCD) on carbide tips provide fast, smooth cuts and last longer than any other type of blade when cutting fiber cement products.
  • Exceptionally long life.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1017402 059511 015881 059511 901146 5/8" DKO 7 1/4" 4
1017412 059511 015898 059511 901313 5/8" 10" 6
1017422 059511 015904 059511 901344 1" 12" 8
Framing

Framing

  • These premium blades are designed for cutting hardwoods and softwoods, composite materials, plywood and some plastic laminates.
  • Alternating top bevel teeth.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1012962 059511 012965 059511 900439 1" 14" 40
1012982 059511 012989 059511 900446 1" 16" 40
Melamine

Melamine

  • Extra fine finishing blade provides extra smooth cutting of melamine, laminates and plastics.
  • Special tooth design results in chip-free cutting and long life of cutting edges.
  • C4 carbide tips with triple chip grind.
  • May be used in both portable and stationary equipment.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1014832 059511 014839 059511 900583 5/8" 10" 60
1014882 059511 014884 059511 900590 5/8" 10" 100
1014872 059511 014907 059511 901061 5/8" 10 " 80
1014922 059511 014921 059511 900606 1" 12" 100
1014992 059511 014990 059511 900613 1" 16" 100
Miter - Aluminum

Miter - Aluminum

  • Designed for all miter, sliding compound and radial arm saws.
  • The Triple Chip blade has a 5° negative hook angle which eliminates kickback and blowout associated with sliding compound miter saws and greatly reduces the tendency to overfeed on radial arm saws.
  • For cutting plastics and non-ferrous metals like aluminum, brass, copper, etc...
  • When used for metal, a mechanical holddown and lubricant sould be used.
  • Ideal for the Makita®, Dewalt®, Hitachi® and other dliding compound miter saws

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1019102 059511 016598 059511 900859 5/8" DKO 8 1/4" 50
1019322 059511 016611 059511 900873 5/8" 10" 80
1019432 059511 016642 059511 900897 1" 12" 80
1019092 059511 016659 059511 900927 5/8" DKO 7 1/4" 50
Miter - Wood

Miter - Wood

  • Designed for all miter, sliding compound miter and radial arm saws.
  • The Alternating Top Bevel (ATB) blade has a 5° negative hook angle.
  • Provides fine, splinter-free cutting of all wood products.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1018102 059511 016567 059511 900828 5/8" DKO 8 1/4" 40
1018212 059511 016574 059511 900835 5/8" DKO 8 1/2" 40
1018322 059511 016581 059511 900842 5/8" 10" 60
1018432 059511 016628 059511 900880 1" 12" 80
Razor Tooth

Razor Tooth

  • Ultra smooth finish; reduces the need for sanding.
  • Ideal blade for laminate flooring.
  • High ATB (alternating top bevel) tooth design provides ultra smooth cutting of melamine, laminates, hardwoods and laminate flooring.
  • Copper plugs reduce noise level.

Show/Hide Products

Item No. UPC UPC Exchange Arbor Diameter Teeth
1019502 059511 016284 059511 901221 5/8" 10" 80
1019472 059511 016291 059511 901290 5/8" DKO 8 1/4" 50
1019462 059511 016307 059511 901283 5/8" <> 7 1/4" 40
1019502 059511 016314 059511 901306 1" 12" 108
Saw Blades
Saw Blades

Exchange-A-Blade offers more than 120 Steel, Carbide, Professional and Industrial series circular saw blades; one of the most complete lines of blades on the market. We have a blade for every type of tool and to cut all types of material whether you are tackling an occasional weekend project or an industrial job.

The Exchange-A-Blade system also allows you to save money and do your...
Steel Blades

• Exchange-A-Blade uses only the finest steel blades available.
• Each blade is chrome nickel alloy steel and is presision ground, set and sharpened.

Steel Blades
Carbide Blades

• These carbide blades are designed for general purpose ripping and cutting of wood and composite materials.
• They are excellent for light and medium-duty cutting and small projects.
• These blades are tipped with superior quality C2 tungsten carbide.

Carbide Blades
Professional Quality

• Made from top quality hardened steel.
• Tips are made of superior quality C2 and C3 tungsten carbide and are ground with a fine 600 grit diamond wheel to achieve maximum sharpness..
• Polished finsh to resist rust and prolong blade life.
• Plates have a hardness of HRC 40 or more and our larger blades have tension rings for improved flatness.

Professional Quality
Industrial Quality

• Made from top quality hardened SK steel
• Polished finish to resist rust and prolong blade life.
• Ground with a fine 800 grit diamond wheel to achieve maximum sharpness.
• Tipped with superior quality C2-C4 Tungsten carbide tips.
• HRC 40-45 plates.

Industrial Quality
Non-Exchangeable

• These blades, part of our Stay Sharp line, are quality carbide tipped blades

Non-Exchangeable
Hole Saws
Hole Saws

Exchange-A-Blade offers a full line of bi-metal, carbide tipped and diamond hole saws designed to cut a wide range of materials which will satisfy both the occasional and seasoned user. Our hole saws are available in the widest range of sizes from ¾” to 7 7/8” We also carry a full line of accessories designed to fit both our own and competitors’ hole saws.
Professional Quality

• These bi-metal hole saws cut wood, plastic, aluminum and steel.
• Deep 1 3/8" cut
• Value priced

Professional Quality
Hole Saw Kits

• The Electrician's kit contains 6 bi-metal hole saws (7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"), a 1/4" round mandrel, a 7/16" quick change hex mandrel and a mandrel adapter.
• The Plumber's kit contans 6 bi-metal hole saws (3/4", 7/8", 1-1/8", 1-1/2", 1-3/4" and 2-1/4"), a 1/4" round mandrel, a 7/16" quick change hex mandrel and a mandrel adapter.

Hole Saw Kits
Industrial Quality

• The most extensve line of Industrial grade bi-metal hole saws.
• Product testing show these to be one of the longest lasting hole saws available on the market.

Industrial Quality
Diamond Blades
Diamond Blades

Exchange-A-Blade Diamond Blades offer longer life, lower operating costs and less wear and tear on equipment than abrasive wheels. We offer a full line of both Exchangeable and Non-Exchangeable Diamond Blades designed to cut all types of concrete, brick, masonry, pavers, ceramic tile, marble and granite products. Our specialty diamond blades are designed for challenging cutting situations...
Green Series

An economical line of Exchangeable and Non-exchangeable Diamond Blades. The blades in this category are designed for lighter duty cutting and smaller jobs where hundreds of cuts are not required. These blades can be used wet or dry, however wet cutting will substantially extend the life of the blade.

Green Series
Bronze Series

• Last up to 250 times longer than abrasive wheels
• Faster than abrasive wheels
• Economical to use for small jobs

Bronze Series
Silver Series

The Silver Series of Diamond Blades is designed for the Professional user who requires heavier duty blades in a wide range of sizes.
These blades can be used for wet or dry cutting however, wet cutting is recommended and will extend the life of the blade.

Silver Series
Gold Series

• Our highest quality, specialty diamond blades.

Gold Series
Diamond Hole Saws

• Drill clean, accurate holes in ceramic, marble, glass, fiberglass and Hardie-Plank.
• For use with handheld or press drills
• Wet cutting only

Diamond Hole Saws
Yellow Series

Economical Turbo and Continuous Rim diamond blades.
Value priced blades suitable for light duty work.
Can be used for wet or dry cutting however wet cutting is recommended and will extend the life of the blade.

Yellow Series
Oscillating Tool Accessories
Oscillating Tool Accessories

Exchange-A-Blade offers a full line of accessories to fit most models of Oscillating power tools. Our unique adapter system allows our full line of oscillating accessories to fit Fein, Bosch, Dremel, Rockwell, Porter Cable and Milwaukee as well as most other popular brands of oscillating tools. Our accessories are manufactured to our exacting specifications to provide long life and...
Exchangeable

• The ONLY exchangeable oscillating tool accessories on the market.

Exchangeable
Non-Exchangeable

• Professional grade accessories to cut, grind, scrape and sand - the perfect jobsite companion.
• Individually packaged - buy only the blades you need.

Non-Exchangeable
Jig Saw and Reciprocating Blades
Jig Saw and Reciprocating Blades

Exchange-A-Blade bimetal reciprocating blades provide the best choice for durability and speed. Their high speed steel teeth are ideal for cutting wood, metal, plastics and general demolition work. Our reciprocating blades are available in both Exchangeable and Non-Exchangeable formats. The universal shank fits all brands of reciprocating saws on the market.

Our bimetal Jigsaw blades...
Reciprocating Saw Blades

These industrial grade blades are made from high speed steel with bi-metal teeth for extended heavy duty cutting. Ideal for cutting wood, metal, plastics and general demolition work. Tempered steel provides the best combination or durability and precision cutting.
Available in all sizes up to 12"

Reciprocating Saw Blades
Jig Saw Blades

Industrial quality Jigsaw blades available in both Bimetal and High Carbon Steel. The high speed steel strength makes them ideal for cutting wood, metal and plastic. Tempered steel provides the best combination of durabiity and precision cutting.
Fits all popular tools with Universal and Bosch shanks.

Jig Saw Blades
Hack Saw Blades

• Standard replacement blades for 10" and 12" hack saws.
• Designed to cut a variety of ferrous and non-ferrous metals.

Hack Saw Blades
Router Bits
Router Bits

The Exchange-A-Blade Router Bit program is one of the most unique accessory programs on the market. We offer 85 different router bits at substantial savings and eliminate two of the biggest frustrations for router owners. Our program offers the right bit for the job without investing in dozens of expensive router bits. Secondly, users can always be assured of having precise, razor sharp...
Professional Quality

• Exceptional quality tungsten carbide tips.
• Refined assortment provides all the best sellers in 1/4" and 1/2" profiles.
• New "Show & Store" packaging makes it easy to find the right bit and provides the maximum protection.

Professional Quality
Industrial Quality

•Our Industrial line of Router Bits are made of the finest tungsten carbide to provide razor sharpness and long life.

Industrial Quality
Screwdriver Bits
Screwdriver Bits

Exchange-A-Blade offers the widest selection of power screwdriver bits in the marketplace. Special alloy steel is heat treated to provide maximum strength and durability. Our hardened tips are torque tested to ensure the highest breaking points and longest life. Most of our screwdriver bits are color coded for easy identification.

Our Impact Driver bits are specially designed to...
Professional Quality

• Our Professional Grade screwdriver bits are made from a special S2 alloy steel which is heat treated for maximum strength and durability.
• These bits are only available in plain, matte finish but offer exceptional value.

Professional Quality
Industrial Quality

• Our industrial screwdriver bits are made from a special alloy steel which is heat treated for maximum strength and durability.
• Hardness is 60/62 HRC surface through to core.
• Torque tested to ensure a higher breaking point.

Industrial Quality
Bit Clips

Bit clips are the the best way to manage your screwdriver bits.
The plastic holder keeps your screwdriver bits organized and helps prevent lost bits. Value priced, with 27 different assortment combinations.

Bit Clips
Screwdrivers

• Ergonomically designed screwdriver handles with interchangeable bits.
For use with all Exchange-A-Blade screwdriver bits.

Screwdrivers
Drill Bits
Drill Bits

Professional quality SDS type bits for concrete, spade bits for wood, masonry bits for concrete screws and titanium coated hex shank drill bits for drill and drive applications.
Titanium Coated Hex Drill Bits

• High speed drill bits provide greater strength and less breakage and run-out
• Two piece bits provide an economical alternative to the one piece bits.
• 1/4" hexagonal shank fits all universal holders.
• Titanium coating for longerlife.
• 135 degree split point for fast, easy starts.

Titanium Coated Hex Drill Bits
Spade Bits

• Double-edged for faster cuts.
• Speed channel for faster chip removal.
• Power groove prevents slippage.
• 1/4" hex sanks for better grip.
• Convenient wire pulling hole in face of bit.
• Compact length (6") gets between studs and into small spaces.
• Titanium coating for longer bit life.

Spade Bits
Bits for concrete screws

• They are carbide tipped and are great for drilling into concrete, brick or block.
• Available in 5/32" and 3/16" diameters.

Bits for concrete screws
SDS Type Bits

• For all types of concrete.

SDS Type Bits
Hinge Bit

• 35mm.
• For the installation of European style cabinet hinges

Hinge Bit
Abrasives
Abrasives

From Flat wheels, Depressed Centre Wheels, Flap disks, Taper Cut Wheels and Wire Brushes, Exchange-A-Blade’s abrasive line will fill all your metal cutting, grinding and polishing needs. All abrasives have metal reinforced arbor holes for better performances and longer life. Our specialty abrasives provide superior performance in tough cutting and grinding jobs such as Stainless Steel and...
Masonry

For the cutting and grinding of masonry products.

Masonry
Metal

Abrasive Wheels and Depressed Centre Wheels especially designed for the grinding and cutting of a wide variety metal products.

Metal
Flap disks

• Aluminum oxide abrasive wheels for stock removal and surface finishing of wood and metal.
• Overlap design removes material faster and lasts many times longer than regular sanding discs.
• Applications include sanding, grinding, rust removal, deburring and bevelling.
• Type 29

Flap disks
Wire Brushes

Professional quality Wire Wheels and Brushes, designed for use on angle grinders, bench grinders and drills. For rapid surface cleaning and prep, deburring and paint and rust removal.

Wire Brushes
Miscellaneous
Miscellaneous

Utility knives, tape measures, ratchet drivers, tile saws and other miscellaneous Exchange-A-Blade products.
Utility Knives

We offer a broad assortment of Professional quality Utility Knives, including 9mm, 18mm. and 25mm sizes.

Utility Knives
Tape Measures

Tape measures that are made to stand up to the rigors of the job site. Triple rivet tips, 7' standout and acrylic coated, easy read blades. Ergonomic designed cases with high tensile springs for long lasting ultra smooth recoil.

Tape Measures
Drivers

Our Driver assortment includes both hand drivers and a variety of ratchet driver sets, including a Stainless Steel set, ideal for boat owners.

Drivers
Tile Saws

Full featured tile saws for the do-it-yourself and professional user.

Tile Saws
Super Saw

• Super sharp radical tooth design cuts both ways.
• Flame hardened teeth last up to 6 times longer.
• Handle forms 90° and 45° angles for easy marking.
• When dull, exchange for another supersaw and save.

Super Saw